Specifications

MEMory Subsystem
MEMory:CLEar Node
Agilent E4418B/E4419B Programming Guide 7-9
MEMory:CLEar Node
This node is used to remove the contents stored in the sensor calibration
tables, frequency dependent offset tables and save/recall registers. This
subsystem removes the data contents but does not affect the name of the
associated table or save/recall register.
The commands associated with this node are:
MEMory:CLEar:[NAME] <string>
MEMory:CLEar:TABLe
Note The contents cleared using these commands are non-recoverable.
prog.book Page 9 Thursday, June 7, 2001 2:55 PM