Specifications

MEMory Subsystem
MEMory Subsystem
7-2 Agilent E4418B/E4419B Programming Guide
MEMory Subsystem
The MEMory command subsystem is used to edit and review sensor
calibration tables, frequency dependent offset tables and save/recall
registersj. This facility can be used to store sensor calibration tables for
the Agilent 8480 series power sensors, and frequency dependent offset
tables which compensate for your test setup. The tables remain stored in
the power meter’s memory during power down. The power meter is
capable of storing 20 sensor calibration tables and 10 frequency dependent
offset tables of 80 frequency points each.
The power meter automatically downloads the Agilent E-series power
sensors calibration tables. These tables cannot be reviewed or edited.
This subsystem is also used to create and review save/recall registers.
Keyword Parameter Form Notes Page
MEMory
:CATalog
[:ALL]? [query only] page 7-4
:STATe? [query only] page 7-6
:TABLe? [query only] page 7-7
:CLEar
[:NAME] <string> [no query],
[non-SCPI]}
page 7-10
:TABLe [no query] page 7-11
:FREE
[:ALL]? [query only] page 7-13
:STATe? [query only] page 7-14
:TABLe? [query only] page 7-15
:NSTates? [query only] page 7-16
:STATe
:CATalog? [query only] page 7-18
:DEFine <string>
[,<numeric_value>]
[non-SCPI] page 7-19
:TABLe
:FREQuency <numeric_value>
[,<numeric_value>]
page 7-22
:POINts? [query only] page 7-25
:GAIN
[:MAGNitude] <numeric_value>
[,<numeric_value>]
[non-SCPI] page 7-26
:POINts? [query only],
[non-SCPI]
page 7-28
:MOVE <string>,<string> [no query],
[non-SCPI]
page 7-29
:SELect <string> [no query],
[non-SCPI]
page 7-30
prog.book Page 2 Thursday, June 7, 2001 2:55 PM