Specifications

CALibration Subsystem
CALibration[1|2]:RCFactor <numeric_value>
Agilent E4418B/E4419B Programming Guide 4-13
Query
CALibration[1|2]:RCFactor? [MIN|MAX]
The query returns the current setting of the reference calibration factor or
the values associated with MIN and MAX.
Query Example
Error Message
If this command is used when an Agilent E-series power sensor is
connected the error -241, “Hardware missing” occurs.
CAL2:RCF? This command queries the
reference calibration factor of
channel B.
prog.book Page 13 Thursday, June 7, 2001 2:55 PM