Specifications

CALibration Subsystem
CALibration[1|2]:AUTO <Boolean>|ONCE
4-8 Agilent E4418B/E4419B Programming Guide
Query
CALibration[1|2]:AUTO?
The query always returns a value of 0.
Error Message
If the calibration was not carried out successfully the error -231, “Data
Questionable; CAL ERROR” occurs. If you are using the Agilent E4419B
the error message specifies on which channel the calibration failed.
If this command is set to ON the error -224, “Illegal parameter value”
occurs.
prog.book Page 8 Thursday, June 7, 2001 2:55 PM