Specifications

MEASurement Instructions
MEASure[1|2][:SCALar][:POWer:AC]? [<expected_value>[,<resolution>[,<source list>]]]
2-50 Agilent E4418B/E4419B Programming Guide
MEASure[1|2][:SCALar][:POWer:AC]? [<expected_value>[,<resolution>[,<source list>]]]
This command sets the specified window’s measurement function to single
channel with relative mode off, aborts, configures the window then
initiates channel A or B, calculates the measurement result and places the
result on the bus.
Syntax
Parameters
Refer to “The Optional Parameters”, on page 2-3 for additional details on
the parameters in this command.
Item Description/Default Range of Values
expected_value
(for the
expected power
level)
A numeric value for the expected
power level. The units of
measurement are dBm and W. The
default units are defined by
UNIT:POWer.
sensor dependent
DEF
1
resolution A numeric value for the resolution.
If unspecified the current
resolution setting is used.
1 to 4
2
1.0, 0.1, 0.01, 0.001
DEF
1
MEAS 1
2
:POW
:AC
:SCAL
?
Space
expected_value
DEF
resolution
,
DEF
source list
,
prog.book Page 50 Thursday, June 7, 2001 2:55 PM