Specifications

Agilent E4418B/E4419B Programming Guide Contents-7
MEMory:TABLe:GAIN[:MAGNitude]:POINts?.......................... 7-28
MEMory:TABLe:MOVE <string>,<string>................................. 7-29
MEMory:TABLe:SELect <string>................................................ 7-30
OUTput Subsystem ............................................................................. 8-1
OUTPut Subsystem ...................................................................... 8-2
OUTPut:ROSCillator[:STATe] <Boolean> .................................. 8-3
OUTPut:TTL[1|2]:ACTive HIGH|LOW..................................... 8-4
OUTPut:TTL[1|2]:FEED <string>.............................................. 8-5
OUTPut:TTL[1|2]:STATe <Boolean> ......................................... 8-7
SENSe Subsystem................................................................................ 9-1
[SENSe] Subsystem...................................................................... 9-2
[SENSe[1]]|SENSe2:AVERage Node.......................................... 9-4
[SENSe[1]]|SENSe2:AVERage:COUNt <numeric_value>........ 9-5
[SENSe[1]]|SENSe2:AVERage:COUNt:AUTO
<Boolean>|ONCE......................................................................... 9-7
[SENSe[1]]|SENSe2:AVERage:SDETect <Boolean>................. 9-10
[SENSe[1]]|SENSe2:AVERage[:STATe] <Boolean>.................. 9-12
[SENSe[1]]|SENSe2:CORRection Node...................................... 9-13
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2 Node ........ 9-14
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2[:SELect]
<string>......................................................................................... 9-15
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe
<Boolean>...................................................................................... 9-17
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3 Node ......... 9-19
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3[:INPut]
[:MAGNitude] <numeric_value>.................................................. 9-20
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe
<Boolean>...................................................................................... 9-23
[SENSe[1]]|SENSe2:CORRection:GAIN[1|2] Node .................. 9-25
[SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN[1|2][:IN-
Put][:MAGNitude] <numeric_value>........................................... 9-26
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <Boolean> ... 9-29
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut]
[:MAGNitude]?.............................................................................. 9-31
[SENSe[1]]|SENSe2:CORRection:LOSS2 Node......................... 9-32
[SENSe[1]]|SENSe2:CORRection:LOSS2[:INPut]
[:MAGNitude] <numeric_value>.................................................. 9-33
[SENSe[1]]|SENSe2:CORRection:LOSS2:STATe <Boolean> ... 9-35
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed
] <numeric_value> ........................................................................ 9-37
The [SENSe[1]]|SENSe2:LIMit:CLEar Node............................. 9-39
[SENSe[1]]|SENSe2:LIMit:CLEar:AUTO
prog.book Page 7 Thursday, June 7, 2001 2:55 PM