Specifications

MEASurement Instructions
CONFigure[1|2][:SCALar][:POWer:AC]:DIFFerence [<expected_value>[,<resolution>[,<source list>]]]
Agilent E4418B/E4419B Programming Guide 2-13
CONFigure[1|2][:SCALar][:POWer:AC]:DIFFerence
[<expected_value>[,<resolution>[,<source list>]]]
This command is only relevant for the Agilent E4419B power meter.
This command is used to set the measurement function and resolution of
the specified window. It sets the measurement function to difference with
relative mode off.
Syntax
Parameters
Refer to “The Optional Parameters”, on page 2-3 for additional details on
the parameters in this command.
Item Description/Default Range of Values
expected_value
(for the
expected power
level)
The power meter ignores the
numeric value entered in this
parameter. Any value entered is
treated like DEF.
sensor dependent
DEF
1
resolution A numeric value for the resolution.
If unspecified the current
resolution setting is used.
1 to 4
2
1.0, 0.1, 0.01, 0.001
DEF
1
CONF
1
2
:POW
:AC
:SCAL
:DIFF
Space
expected_value
DEF
resolution
,
DEF
source list
,
prog.book Page 13 Thursday, June 7, 2001 2:55 PM