Specifications

MEASurement Instructions
CONFigure[1|2]?
Agilent E4418B/E4419B Programming Guide 2-7
Example
Reset Condition
On reset,
• the command function is set to :POWer:AC.
• the expected power level is set to +20 dBm.
• the resolution is set to 3.
• the source list
■ on the Agilent E4418B is set to channel A on both windows.
■ on the Agilent E4419B is set to channel A on the upper
window and channel B on the lower window.
CONF2? This command queries the current
configuration of the lower window.
prog.book Page 7 Thursday, June 7, 2001 2:55 PM