Specifications

Power Meter Remote Operation
Status Reporting
1-86 Agilent E4418B/E4419B Programming Guide
4 MEASuring This is a summary bit for the Operation MEASuring
Register.
SET: When the power meter is taking a
measurement.
CLEARED: When the measurement is finished.
5Waiting for
TRIGger
This is a summary bit for the Operation TRIGger
Register.
SET: When the power meter enters the “wait for
trigger” state. Refer to Figure 1-8.
CLEARED: When the power meter enters the “idle”
state. Refer to Figure 1-8.
10 SENSe This is a summary bit for the Operation SENSe
Register.
SET: When the power meter is reading data from
the Agilent E-series power sensor EEPROM.
CLEARED: When the power meter is not reading
data from the Agilent E-series power sensor
EEPROM.
11 Lower Limit
Fail
This is a summary bit for the Lower Limit Fail
Register.
SET: If a measurement is made and either a
channel or window lower limit test fails.
CLEARED: If a measurement is made and the
lower limit test is not enabled or the test is enabled
and passes.
12 Upper Limit
Fail
This is a summary bit for the Upper Limit Fail
Register.
SET: If a measurement is made and either a
channel or window upper limit test fails.
CLEARED: If a measurement is made and the
upper limit test is not enabled or the test is enabled
and passes.
Bit
Number
Meaning EVENts Causing Bit Changes
prog.book Page 86 Thursday, June 7, 2001 2:55 PM