System information

Chapter 4: Backing Up and Restoring System Software

System Recovery Procedure

6 Load the System Recovery DVD in your DVD-ROM

drive.

7 Restart the computer. If necessary, press the reset

button on the front of the computer.

8 At the Agilent 3070: prompt, type restore system.

9 Press any key to scroll through the license

agreement.

10 In the Power Quest screen, click Continue.

11 In the Warning message window, click Yes.

12 When the restoration is completed and you see the

Agilent 3070: prompt, remove the DVD from the

drive.

13 Press CTRL-ALT-DEL to restart the computer.

IO Configuration Procedure

1 Log in as administrator.

2 Right-click the blue IO icon on the right side of the

Taskbar and select Run IO Config.

3 In the Available Interface Types field, select 82350 PCI

GPIB (older controllers) or 82357 USB to GPIB (newer

controllers) and click Configure.

4 In the SICL Interface Name field, ensure that hpib7 is

selected, and click OK.

5 In the IO Config window, click OK.

6 In the Restart message window, click OK.

7 Restart the computer: click Start > Shutdown > select

Restart > click OK.

This concludes the recovery procedure. Now restore the

unique files listed on page 28.