System information

© Agilent Technologies 2001–2003 Administering Agilent 3070 Systems (MS Windows NT and 2000) 4-24
Chapter 4: Backing Up and Restoring System Software
3 Choose a recovery option. Available
options include:
■ Recover Boot Disk
■ Recover Entire System
■ Exit from Disaster Recovery
WARNING
✸
Use this option to recover all hard disks on your system.
NOTE: All data on the drives to be recovered will be
overwritten.
a Press the DOWN ARROW key to select Recover Entire System
from the Available Options box, then press Enter.
NOTE
If you have placed board files on another disk drive, and you
suspect that only your boot disk is corrupted or you have had
to replace the boot disk, you may attempt to recover the boot
disk only. This will leave all data on other disks intact.
However, this may cause data to be overwritten on other disks
as well. It is recommended that you select Recover Entire
System.
b Several messages appear on screen. Read each screen and press
Enter to continue.
Table 4-5 How to restore a system from a disaster using boot recovery diskettes and full backup tape (continued)
Task Step