System information

© Agilent Technologies 2001–2003 Administering Agilent 3070 Systems (MS Windows NT and 2000) 4-14
Chapter 4: Backing Up and Restoring System Software
Restoring Selected
Data from a Backup
Tape
This section describes the procedures for restoring
selected data from a backup tape using TapeWare’s
Restore Specific Wizard. Use this wizard to selectively
restore data from individual drives, folders, or files.
For instructions on restoring an entire system, see
Restoring a 3070 System from a Full Backup Tape on
page 4-19.
Restoring Specific Data
You can use a full or partial backup tape to selectively
restore data to your system. Table 4-3 on page 4-14
describes how to restore specific data from a backup
tape.
Table 4-3 How to recover specific data from a backup tape
Task Step
1 Log on as Windows
Administrator.
a Press Ctrl-Alt-Del to log on.
b The default User Name is Administrator. Click OK.
No password is necessary when you receive your 3070 system. After you establish
an Administrator account, you must enter the password.
2 Start TapeWare. a Insert the backup tape into the tape drive. Use either a full or partial backup tape that
contains the data you want to recover.
b Double-click the TapeWare Administrator icon on your desktop, or
from the Start menu, point to Programs > TapeWare > TapeWare Administrator.
3 Log on to TapeWare
as ADMIN.
a The default User Name is ADMIN.
No password is necessary when you receive your 3070 system. After you establish
ADMIN accounts, you must enter the Password, then click OK.