System information

© Agilent Technologies 2002, 2003 Administering Agilent 3070 Systems (MS Windows NT and 2000) 3-19
Chapter 3: Setting Up and Configuring New Systems
3 Verify that the list of
Components
checked are used by
this connection:
includes:
• Client for Microsoft Networks
• File and Printer Sharing for Microsoft Networks
• NetBEUI Protocol (optional)
• Internet Protocol (TCP/IP)
NOTE
The Internet Protocol (TCP/IP) is required by the testhead controller.
4 Specify IP
Addresses.
a Select Internet Protocol (TCP/IP), then click Properties.
b Click Obtain an IP address automatically. Use this step if your domain server supports
DHCP.
If DHCP is not supported, manually enter IP address information:
Click Use the following IP address, then type the IP address, Subnet mask, and
Default gateway numbers.
5 Specify DNS server
addresses.
a Select Obtain DNS server address automatically, or
b Click Use the following DNS server addresses: and type the Preferred DNS server and
an Alternate DNS server.
Table 3-5 Configuring and Connecting a Local Area Connection (continued)
Task Step