System information

© Agilent Technologies 2002, 2003 Administering Agilent 3070 Systems (MS Windows NT and 2000) 3-18
Chapter 3: Setting Up and Configuring New Systems
Configuring a
Network Adapter
Card (Local Area
Connection)
A 3070 MS Windows® system includes two network
adapter cards: a 3Com Etherlink XL 10/100 PCI and a
Realtek RTL8139(A)-based Fast Ethernet Adapter.
Agilent configures the Local Area Connection for the
3Com Etherlink XL 10/100 PCI to connect only to the
testhead. Never change these settings.
The Local Area Connection for the Realtek
RTL8139(A)-based Fast Ethernet Adapter can be
configured and connected to your site network. Contact
your network administrator for assistance in configuring
adapter cards and connecting to a site network.
Tabl e 3-5 describes how to configure a network adapter
card (Local Area Connection 2).
ADVICE
Gather the networking configuration information
in Table 3-4 before performing the procedure in
Table 3-5.
Table 3-5 Configuring and Connecting a Local Area Connection
Task Step
1 Open the Network
and Dial-up
Connections
window.
a On the Desktop, right-click My Network Places.
b Click Properties.
2 Display the Local
Area Connection 2
Properties.
a Right-click Local Area Connection 2,
b Click Properties.