System information

© Agilent Technologies 2002, 2003 Administering Agilent 3070 Systems (MS Windows NT and 2000) 3-16
Chapter 3: Setting Up and Configuring New Systems
e Follow the instructions listed below the
certification number. Where it says Enter Node
ID
, type the 12-character hardware (MAC)
address for the target system which you recorded
in Step 1c.
f Enter the Agilent serial number from your
controller (if the controller was not supplied by
Agilent, use the controller manufacturer's serial
number
g In the space provided, enter an email address
where you can retrieve the license file. You will
receive the license file via this email address from
[e-mail]. The email will
contain a message with instructions for installing
the license file onto the 3070.
You may also view the license with your internet
browser. Return to the main screen and select option
III: Get previously issued licenses for this
order.
Software License Activation
3 Activate your Software License Key
a Open the email and save the attachment license
key in the $AGILENT3070_ROOT/lib directory
on your 3070 controller or test development
computer.
b Rename the license file attachment using a unique
name. For example you could use a date-name
format like agilent3070_<date>.lic, where
<date> is the YYYYMMDDHHMM (YYYY is the year,
MM is the month; DD is the day and HHMM is
the current time. Change the file extension to
.lic.
NOTE
Ensure the License File ends with a .lic file
name extension. If the file does not have a .lic
extension, manually change it to .lic.
Validate Software License Key
1 Run the 3070 Software License Validation
Application by typing licenseValidation.ksh in
a korn shell window. Hit return.
2 Select the Test License button. License file entries
that have valid data are shown in green font. Invalid
license file entries are highlighted in red font.
3 Select the Close button or select to exit the 3070
Software License Validation application.