System information

© Agilent Technologies 2001–2002 Administering Agilent 3070 Systems (MS Windows NT and 2000) 8-43
Chapter 8: Reference
Rotating the
Testhead
CAUTION
✸
Remove all objects, including the monitor /
keyboard support arms, from the rotational path of
the testhead.
During rotation, should the testhead hit anything,
damage could result.
CAUTION
✸
Remove the shipping bolts before attempting to
rotate the testhead. Otherwise, damage can result.
1 Open the pod door.
2 Press and hold the testhead rotation switch inside the
pod until the testhead rotates to the desired position.
There is also sometimes a testhead rotation switch on
the rear of the pod.
NOTE
The PDU must be turned on for the testhead
rotation switch to be active.