System information

Chapter 8: Reference

drivethru

Enables the testing of digital devices through series resistors using Agilent TestJet

technology. Use the Agilent Drive Thru Test in combination with the Agilent Access

Consultant to identify and selectively remove nonessential probing locations.

express fixturing

Allows Agilent SimPlate Express or cassette fixtures for your board test. If this option is not

enabled, only an Agilent SimPlate Fixture can be used.

flash70

Enables flash memory programming mode.

flash isp

Enables flash isp software, which supports new data formats. Test system must have

ControlXTP cards installed to utilize this feature.

incircuit test

Enables automatic in-circuit test generation for systems which do not have it.

magic

Enables Agilent MagicTest circuit analysis mode.

multiple board

versions

Enables Agilent Multiple Board Versions.

paneltest

Enables software that helps you develop tests for multiple-board panels on one fixture.

pld isp

Enables native PLD programming on the 3070 and supports CPLD programming with

STAPL, SVF, Jam and JBC file types.

polarity check

Enables Polarity Check testing.

powered testing

Allows limited powered testing on an Agilent 3072 system (a maximum of two HybridPlus

Cards, one HybridPlus and one ChannelPlus Card, or one HybridPlus and one AccessPlus

Card per module).

silicon nails

Enables automatic generation of silicon nails ITL test files.

Table 8-13 Some enable <keywords> statements in the standard config file

enable <keywords> Functional Description: