System information

© Agilent Technologies 2001–2002 Administering Agilent 3070 Systems (MS Windows NT and 2000) 8-26
Chapter 8: Reference
System Config File
Specifics
The path to the system config file is:
$AGILENT3070_ROOT/diagnostics/th1/config
It must match the actual testhead card configuration.
It will be necessary to edit the system config file if the
testhead cards or locations of the testhead cards have
changed.
To edit the system config file:
1 Login as service3070 (default password is
service).
2 At a BT-BASIC window prompt, enter:
msi btgetenv$ ("AGILENT3070_ROOT") &
"/diagnostics/th1"
3 Enter:
get "config"
4 Edit the file to match the actual testhead card
configuration.
5 Enter:
re-save
6 Compile the changed system config file. See
Compiling the System and Standard Config Files
on page 8-35
The "Official" and "Actual" System Config Files
The "official" system config file is the system config file
as when the system was shipped.
It is contained on a printout shipped with the system,
and can be used as a model if it should be necessary to
customize the system config file.
The "actual" system config file is the system config file
in use which reflects the actual cards and card locations
in the testhead.
If the System Config File is Corrupt
One of the sys.config.xxx templates can be copied
from the $AGILENT3070_ROOT/diagnostics directory
and edited to match the actual system configuration.
NOTE
Changes to the system config file should be
reflected in the standard config file. See Standard
Config File Specifics on page 8-29.