System information

© Agilent Technologies 2001–2002 Administering Agilent 3070 Systems (MS Windows NT and 2000) 8-10
Chapter 8: Reference
How to Resolve the Standard Config File from the
System Config File
If the system config file has changed it is good practice
to edit the standard config file to reflect the changes.
This is a service to board test development
programmers.
See Table 8-6 to resolve the standard config file from
the system config file.
Figure 8-1 on page 8-15 illustrates the concept.
The desired end result is to copy the cards ..., serial
ports
..., supplies ... and ports ... statements
from the system config file to the standard config file.
Table 8-5 Edit the system config file to match the testhead configuration
Task Step
1 Open the system config file
in a BT-BASIC window.
a Open a BT-BASIC window by double-clicking the desktop icon.
b From the BT-BASIC command line, enter:
get btgetenv$ ("AGILENT3070_ROOT") & "/diagnostics/th1/config"
2 Arrange or modify
statements to reflect the
actual testhead
configuration.
Do this as required.
See Table 8-8 on page 8-17 for commonly used BT-BASIC commands.
3 Save and exit the system
config file.
•Enter:
1) re-save
2) exit
4 Compile the system config
file.
See Compiling the System and Standard Config Files on page 8-35.