Specifications

Release Notes 7
Important Notes for 08.30p Software Release
Windows 7: 32-bit and 64-bit
The new rp5800 system controller is pre- loaded with the 32- bit version of
Windows 7, as the Medalist i3070 software was designed, built and
optimized for 32- bit operation.
Installation on Windows 7 64- bit operating system is available for test
development workstations.
Newer Version of BOOTP Turbo Software
As described in Service Note 3070- 87, test system controllers running
Medalist i3070 software 08.21p on Windows 7 may encounter the following
messages when booting the testhead:
module 3 failed self-test completion handshake
module 2 failed self-test completion handshake
module 1 failed self-test completion handshake
module 0 failed self-test completion handshake
Installing a newer version of BOOTP Turbo software may resolve the issue.
You can find the newer version of BOOTP Turbo software (
bootpt.exe) at
either of these locations:
• www.agilent.com/find/i3070patches
• W7\software\bootp folder in the Medalist i3070 08.30p software release
DVD.
Update the Bootp Turbo software as follows:
1 Back up the bootptab file in C:\Windows\system32\drivers\etc.
2 Go to Control Panel > Programs and Features and remove the existing
BOOTP Turbo software.
3 Locate and double- click bootpt.exe. Follow the instructions to complete
the installation.
4 Rename bootptab.org to bootptab in C:\Windows\system32\drivers\etc.
5 Restart the controller.