Technical data

8 3000 X-Series Oscilloscopes Advanced Training Guide
1 Getting Started
• The [Intensity] key and the Entry knob lets you set the desired
signal brightness.
Horizontal Controls
a Turn the large knob in the Horizontal control section clockwise and
counter- clockwise to control the time/div setting of the horizontal
axis.
Observe the changes in the displayed signal. The current timebase
setting is displayed at the top of the display on the status line.
b Turn the small knob in the horizontal control section to move the
trigger point (solid orange triangle) from the reference point (hollow
orange triangle).
c Press the [Horiz] key to display the Horizontal menu. Note the various
Time Modes of Normal, Roll, and XY. Also notice the Zoom mode
softkey.
d Press the (zoom) key to quickly turn on the zoom mode. This
split- screen mode shows the big picture on top and an expanded
view on the bottom. Turn the large timebase knob counter- clockwise
to make the window on top larger.