Technical data

Oscilloscope Familiarization Labs 2
3000 X-Series Oscilloscopes Advanced Training Guide 15
20 Turn the Entry knob again until the arrow points to Minimum; then
push the Entry knob.
Your scope’s display should now look similar to Figure 4 showing four
continuously update measurements; Frequency, Vp- p, Vmax, and Vmin,
along with statistics for each of these measurements. Let’s now perform
four different measurements.
21 Press the Clear Meas softkey; then press the Clear All softkey.
22 Set the scope’s timebase to 200.0 ns/div. Expanding on the pulse will
provide us with increased measurement resolution.
23 Now select to measure To p, Base, Rise Time, and Fall Time.
Figure 4 The scope automatically performs up to four parametric measurements.