Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Making Measurements 4
Agilent 3000 Series Oscilloscopes User’s Guide 93
Time Measurements
There are 10 automatic time measurements plus the hardware frequency
counter:
• Frequency.
• Period.
• Rise Time.
• Fall Time.
• + Pulse Width.
• - Pulse Width.
• + Duty Cycle.
• - Duty Cycle.
• Delay 1-2, rising edges.
• Delay 1-2, falling edges.
• Counter (Frequency).
Frequency
Measures the frequency of a waveform. See Figure 41 on page 94.
Period
Measures the period of a waveform.