Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Capturing Data 3
Agilent 3000 Series Oscilloscopes User’s Guide 75
Because minimum and maximum values for a sample period are stored,
you can use the Peak Detect acquisition mode to avoid waveform aliasing.
To select the Peak Detect acquisition mode:
1 Press Acquire
.
2 In the Acquire menu, press Acquisition until “Peak Detect” is selected.