Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
A
61
Agilent 3000 Series Oscilloscopes
User’s and Service Guide
3
Capturing Data
Overview of Sampling 62
Choosing the Sampling Mode 68
Choosing the Acquisition Mode 72
Adjusting the Trigger Level 76
Choosing the Trigger Mode 78
Setting Other Trigger Parameters 82
Using the External Trigger Input 83
Recording/Playing-back Waveforms 83
This chapter describes sampling and acquisition modes and how to set up
triggers.