Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Displaying Data 2
Agilent 3000 Series Oscilloscopes User’s Guide 53
Using Math Function Waveforms
The math functions control allows the selection of the math functions:
• Add.
• Subtract.
• Multiply.
• FFT (Fast Fourier Transform).
The mathematical result can be measured using the grid and cursor
controls.
The amplitude of the math waveform can be adjusted by selecting a menu
item and turning the Entry
knob. The adjustment range is in a 1- 2- 5 step
from 0.1% to 1000%.
The math scale setting is displayed on the status bar.
Figure 24 Math Scale Setting Value
Math Scale