Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
2 Displaying Data
44 Agilent 3000 Series Oscilloscopes User’s Guide
Using the Vertical Controls
The vertical controls consist of:
• The channel (1
, 2), Math, and Ref buttons — turn waveforms on or off
(and display or hide their menus).
• The vertical scale knobs — change the amplitude per division setting for
a waveform, using ground as a reference.
• The vertical position knobs — change the vertical position of the
waveform on the screen.
Figure 15 Vertical Controls
Math
Scale knobs
Position knobs