Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Displaying Data 2
Agilent 3000 Series Oscilloscopes User’s Guide 43
To specify a trigger holdoff:
1 Press Main/Delayed
.
2 In the Main/Delayed menu, select Holdoff and turn the Entry
knob to
adjust the holdoff setting.
To reset the trigger holdoff
1 In the Main/Delayed menu, select the Holdoff Reset menu item to return
the trigger holdoff setting to the 100 ns minimum value.
To view the sample rate
The sample rate used for the current horizontal scale setting is displayed
at the bottom right- hand corner of the screen.
When the equivalent- time sampling mode is selected (see “Choosing the
Sampling Mode” on page 68), the effective sample rate is displayed.
See Also “Memory Depth and Sample Rate” on page 67.