Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
2 Displaying Data
42 Agilent 3000 Series Oscilloscopes User’s Guide
• Horizontal position knob.
• Trigger controls.
To reset the trigger offset
Turning the horizontal position knob changes the position of the trigger
point relative to the center of the screen. To return the trigger position to
the center of the screen:
1 Press Main/Delayed
.
2 In the Main/Delayed menu, press Trig-Offset Reset.
To specify a trigger holdoff
Trigger holdoff can be used to stabilize a waveform. The holdoff time is
the oscilloscope's waiting period before starting a new trigger. During the
holdoff time oscilloscope will not trigger until the holdoff has expired.
Figure 14 Trigger Holdoff