Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
4 Agilent 3000 Series Oscilloscopes User’s Guide
In This Book
This guide shows how to use the Agilent 3000 Series
oscilloscopes.
1Getting Started
Describes the basic steps to take when first using the
oscilloscope.
2 Displaying Data
Describes how to use the horizontal and vertical controls,
channel settings, math waveforms, reference waveforms, and
display settings.
3 Capturing Data
Describes acquisition and sampling modes and how to set up
triggers.
4 Making Measurements
Describes voltage, time, and cursor measurements.
5 Saving, Recalling, and Printing Data
Describes how to save, recall, and print data.
6 Oscilloscope Utility Settings
Describes other oscilloscope settings found in the Utility
menu.
7 Specifications and Characteristics
Describes the 3000 Series oscilloscopes’ specifications and
characteristics.
8Service
Describes oscilloscope maintanance, performance testing, and
what to do if your oscilloscope requires service.