Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Getting Started 1
Agilent 3000 Series Oscilloscopes User’s Guide 21
Step 2. Turn on the oscilloscope
The next few steps (turning on the oscilloscope, loading the default setup,
and inputting a waveform) will provide a quick functional check to verify
the oscilloscope is operating correctly.
1 Connect the power cord to a power source.
Use only power cords designed for your oscilloscope.
Use a power source that delivers the required power (see Table 12 on
page 125).
2 Turn on the oscilloscope.
Wait until the display shows that all self- tests passed.
WARNING
To avoid electric shock, be sure the oscilloscope is properly grounded.