Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
A
17
Agilent 3000 Series Oscilloscopes
User’s and Service Guide
1
Getting Started
Step 1. Inspect the package contents 18
Step 2. Turn on the oscilloscope 21
Step 3. Load the default oscilloscope setup 22
Step 4. Input a waveform 23
Step 5. Become familiar with the Front Panel Controls 24
Step 6. Become familiar with the oscilloscope display 28
Step 7. Use Auto-Scale 29
Step 8. Compensate probes 31
Step 9. Use the Run Control buttons 33
This chapter describes the basic steps to take when first using the
oscilloscope.