Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
Agilent 3000 Series Oscilloscopes User’s Guide 15
Tables
Table 1. Power Cords 20
Table 2. Auto-Scale Default Settings 30
Table 3. FFT Window Characteristics 55
Table 4. Specifications 120
Table 5. Acquisition System Characteristics 121
Table 6. Vertical System Characteristics 121
Table 7. Horizontal System Characteristics 122
Table 8. Trigger System Characteristics 122
Table 9. Display System Characteristics 124
Table 10. Measurement Features 124
Table 11. General Characteristics 124
Table 12. Power Requirements 125
Table 13. Environmental Characteristics 125
Table 14. Other 125
Table 15. Equipment Required for Performance Verification Testing 129
Table 16. DC Gain Accuracy Specification 130
Table 17. Equipment Required for DC Gain Accuracy Test 130
Table 18. DC Gain Accuracy Specification 136
Table 19. Equipment Required for Performance Verification Testing 136
Table 20. Oscilloscope Models and Signal Generator Frequency 142
Table 21. DC Gain Test 144
Table 22. Analog Bandwidth - Maximum Frequency Check 145