Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
6 Oscilloscope Utility Settings
116 Agilent 3000 Series Oscilloscopes User’s Guide
Turning Sound ON or OFF
To turn the oscilloscope’s beeper sound on or off:
1 Press Utility
.
2 In the Utilities menu, select Sound to toggle between:
• — on.
• — off.
Displaying System Information
To display the oscilloscope’s system information:
1 Press Utility
.
2 In the Utilities menu, press System Info.
The system information contains:
• Model number.
• Power up times.
• Serial number.
• Software version.
• Installed module information.
To exit, press Run/Stop
.