Technical data
Table Of Contents
- Agilent 3000 Series Oscilloscopes-At a Glance
- In This Book
- Contents
- Figures
- Tables
- Getting Started
- Step 1. Inspect the package contents
- Step 2. Turn on the oscilloscope
- Step 3. Load the default oscilloscope setup
- Step 4. Input a waveform
- Step 5. Become familiar with the Front Panel Controls
- Step 6. Become familiar with the oscilloscope display
- Step 7. Use Auto-Scale
- Step 8. Compensate probes
- Step 9. Use the Run Control buttons
- Displaying Data
- Capturing Data
- Making Measurements
- Saving, Recalling, and Printing Data
- Oscilloscope Utility Settings
- Specifications and Characteristics
- Service
- Safety Notices
- Index
5 Saving, Recalling, and Printing Data
108 Agilent 3000 Series Oscilloscopes User’s Guide
To load a file from a USB device
When loading a waveform or setup file from a USB device, the Load menu
is used to select the file.
In the Load menu:
• To select files or folders, press File Name and turn the Entry
knob.
• To navigate into a selected folder, press File Name.
• When the desired file is selected, press Load to load the file.
Figure 49 USB Device Load Menu