Service manual

Agilent 382A Operating And Service Manual vii
Safety Earth Ground
Before Applying
Power
Verify that the product is configured to match the available main power
source as described in the input power configuration instructions in this
manual. If this product is to be powered by autotransformer, make sure the
common terminal is connected to the neutral (grounded) side of the ac power
supply.
1SM1-A This text indicates that the instrument is an Industrial Scientific and Medical
Group 1 Class A product (CISPER 11, Clause 4).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is OFF or in STANDBY
position.
This product complies with the WEEE Directive (2002/96/EC)
marking requirements. The affixed label indicates that you must not
discard this electrical/ electronic product in domestic household
waste.
Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as a "Monitoring
and Control instrumentation" product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Agilent office,
or see http://www.agilent.com/environment/product/ for more
information.
This is a Safety Class I product (provided with a protective
earthing terminal). An uninterruptible safety earth ground must
be provided from the main power source to the product input
wiring terminals, power cord, or supplied power cord set.
Whenever it is likely that the protection has been impaired, the
product must be made inoperative and secured against any
unintended operation.