Service manual

26 Agilent 382A Operating and Service Manual
Maintenance
7. Check backlash by applying inward pressure on the knob end of the
shaft. The shaft should move freely and spring back to its original
position.
8. Attach flag cable.
9. Lubricate worm gear (recommended lubricant: Mobilux No. 1, Mfg. by
Mobil Oil Co., or Moly Grease, Agilent Stock No. 6040-0012).
Dial Cord Replacement 1. With dial set to 50, run cable through lug on center section and clamping
screw.
2. Position flag behind 50 and tighten clamp screw.