User`s guide

User’s and Service Guide 4-3
Front and Rear Panels
Front Panel
Figure 4-2 Physical Characteristics of 3.5 mm Connector
The Transmission and Reflection Ports
The Transmission and Reflection Ports are female 3.5 mm 50 Ω
connectors. A 50 Ω cable connects directly to the Port 1/Port 2 or
Reflection/Transmission port of the network analyzer using the cable,
part number 08720-20245, that was shipped with your test set.
CAUTION Check your analyzer documentation for damage limits to the RF OUT
port. Make sure that your test setup will not cause those limits to be
exceeded.
The Ground Connector
The Ground connector provides a convenient front panel ground
connection for a standard banana plug.
The Port Connection Status LCD
The Port Connection Status LCD provides visual feedback of which
port(s) are connected to the Transmission and Reflection ports of the
test set. When the LCD displays a path connection, all other
corresponding test ports are internally terminated in 50 Ω.