User`s guide

User’s and Service Guide 13
87050A Option K24 Power Cables
Power Cables
The line power cable is supplied in one of several configurations, depending on the
destination of the original shipment.
Each instrument is equipped with a three-wire power cable. When connected to an
appropriate ac power receptacle, this cable grounds the instrument chassis. The type of
power cable shipped with each instrument depends on the country of destination. See
Figure 7 on page 14 for the part numbers of these power cables. Cables are available in
different lengths. See "Contacting Agilent" on page 57 for descriptions and part numbers
of cables other than those described in Figure 7.
CAUTION Always use the three-prong ac power cord supplied with this product. Failure
to ensure adequate grounding by not using this cord may cause damage to the
product.
WARNING This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.