User`s guide

2 User’s and Service Guide
87050A Option K24 Description
Description
The Agilent 87050A Option K24 Multiport Mechanical Switching Test Set is designed for
use with 50 Ω network analyzers such as the Agilent PNA E8362B, PNA-L N5230A,
8719D/E, 8720D/E, 8722D/E and 8753D/E.
The Test Set provides the ability to make single connection, multiple measurements of
multiport devices with up to 24 ports, such as distribution amplifiers, taps, switches and
couplers. Throughput is increased by reducing the number of device reconnects the
operator must perform. Switching is performed with mechanical switches.
The test set can be controlled by using an external GPIB controller, or parallel control
NOTE This User’s and Service Guide documents the use of the test set with an
Agilent 8720D or the PNA E8362B.
87050A Option K24 Options
UK6
Option UK6 provides a commercial calibration certificate including actual test data. Data
includes test results of 95 tests including reflection, transmission, and isolation from all
test ports.
Rack Ear Mounts
Option 908 (5062-3974) provides rack mounts that make it quick and easy to install or
remove the test set from a mainframe.
For further information on these options please contact Agilent Technologies. Refer
to "Contacting Agilent" on page 57.