Technical data

Commands Quick Reference 4
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 79
:FUNCtion:RANGe
<range> (see
page 290)
:FUNCtion:RANGe? (see
page 290)
<range> ::= the full-scale
vertical axis value in NR3
format.
The range for ADD, SUBT, MULT is
8E-6 to 800E+3.
The range for the FFT function is
8 to 800 dBV.
:FUNCtion:REFerence
<level> (see
page 291)
:FUNCtion:REFerence?
(see page 291)
<level> ::= the value at center
screen in NR3 format.
The range of legal values is
+/-10 times the current
sensitivity of the selected
function.
:FUNCtion:SCALe
<scale
value>[<suffix>] (see
page 292)
:FUNCtion:SCALe? (see
page 292)
<scale value> ::= integer in NR1
format
<suffix> ::= {V | dB}
:FUNCtion:SOURce1
<source> (see
page 293)
:FUNCtion:SOURce1?
(see page 293)
<source> ::= {CHANnel<n> | GOFT}
<n> ::= {1 | 2 | 3 | 4} for 4ch
models
<n> ::= {1 | 2} for 2ch models
GOFT is only for FFT operation.
:FUNCtion:SOURce2
<source> (see
page 294)
:FUNCtion:SOURce2?
(see page 294)
<source> ::= {CHANnel<n> | NONE}
<n> ::= {{1 | 2} | {3 | 4}} for
4ch models, depending on SOURce1
selection
<n> ::= {1 | 2} for 2ch models
Table 13 :FUNCtion Commands Summary (continued)
Command Query Options and Query Returns
Table 14 :HARDcopy Commands Summary
Command Query Options and Query Returns
:HARDcopy:AREA <area>
(see page 297)
:HARDcopy:AREA? (see
page 297)
<area> ::= SCReen
:HARDcopy:APRinter
<active_printer> (see
page 298)
:HARDcopy:APRinter?
(see page 298)
<active_printer> ::= {<index> |
<name>}
<index> ::= integer index of
printer in list
<name> ::= name of printer in
list
:HARDcopy:FACTors {{0
| OFF} | {1 | ON}}
(see page 299)
:HARDcopy:FACTors?
(see page 299)
{0 | 1}