Technical data

698 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
32 :WMEMory<r> Commands
:WMEMory<r>:SAVE
(see page 790)
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1-2 in NR1 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1 to (# analog channels) in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math
function waveform to the specified reference waveform location.
See Also • Chapter 32, “:WMEMory<r> Commands,” starting on page 693
• ":WMEMory<r>:DISPlay" on page 696
NOTE
Only ADD or SUBtract math operations can be saved as reference waveforms.