Technical data

686 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

31 :WGEN Commands

:WGEN:PERiod

(see page 790)

Command Syntax

:WGEN:PERiod <period>

<period> ::= period in seconds in NR3 format

For all waveforms except Noise and DC, the :WGEN:PERiod command

specifies the period of the waveform.

You can also specify the period indirectly using the :WGEN:FREQuency

command.

Query Syntax

:WGEN:PERiod?

The :WGEN:PERiod? query returns the currently set waveform generator

period.

Return Format

<period> ::= period in seconds in NR3 format

See Also • "Introduction to :WGEN Commands" on page 665

• ":WGEN:FUNCtion" on page 667

• ":WGEN:FREQuency" on page 666