Technical data

:WGEN Commands 31
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 677
:WGEN:MODulation:FSKey:RATE
(see page 790)
Command Syntax
:WGEN:MODulation:FSKey:RATE <rate>
<rate> ::= FSK modulation rate in Hz in NR3 format
The :WGEN:MODulation:FSKey:RATE command specifies the rate at which
the output frequency "shifts".
The FSK rate specifies a digital square wave modulating signal.
Query Syntax
:WGEN:MODulation:FSKey:RATE?
The :WGEN:MODulation:FSKey:RATE? query returns the FSK rate setting.
Return Format
<rate><NL>
<rate> ::= FSK modulation rate in Hz in NR3 format
See Also • ":WGEN:MODulation:AM:DEPTh" on page 672
• ":WGEN:MODulation:AM:FREQuency" on page 673
• ":WGEN:MODulation:FM:DEViation" on page 674
• ":WGEN:MODulation:FM:FREQuency" on page 675
• ":WGEN:MODulation:FSKey:FREQuency" on page 676
• ":WGEN:MODulation:FUNCtion" on page 678
• ":WGEN:MODulation:FUNCtion:RAMP:SYMMetry" on page 679
• ":WGEN:MODulation:STATe" on page 681
• ":WGEN:MODulation:TYPE" on page 682