Technical data

:TRIGger Commands 29

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 623

:TRIGger:TV:MODE

(see page 790)

Command Syntax

:TRIGger:TV:MODE <mode>

<mode> ::= {FIEld1 | FIEld2 | AFIelds | ALINes

| LFIeld1 | LFIeld2 | LALTernate}

The :TRIGger:TV:MODE command selects the TV trigger mode and field.

Old forms for <mode> are accepted:

Query Syntax

:TRIGger:TV:MODE?

The :TRIGger:TV:MODE? query returns the TV trigger mode.

Return Format

<value> ::= {FIE1 | FIE2 | AFI | ALIN | LFI1 | LFI2 | LALT}

See Also • "Introduction to :TRIGger Commands" on page 589

• ":TRIGger:TV:STANdard" on page 626

• ":TRIGger:MODE" on page 598

<mode> Old Forms Accepted

FIEld1 F1

FIEld2 F2

AFIelds ALLFields, ALLFLDS

ALINes ALLLines

LFIeld1 LINEF1, LINEFIELD1

LFIeld2 LINEF2, LINEFIELD2

LALTernate LINEAlt