Technical data

:TRIGger Commands 29

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 603

:TRIGger[:EDGE]:LEVel

(see page 790)

Command Syntax

:TRIGger[:EDGE]:LEVel <level>

<level> ::= <level>[,<source>]

<level> ::= 0.75 x full-scale voltage from center screen in NR3 format

for internal triggers

<level> ::= ±(external range setting) in NR3 format

for external triggers

<level> ::= ±8 V for digital channels (MSO models)

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {CHANnel<n> | DIGital<d> | EXTernal}

for the MSO models

<n> ::= 1 to (# analog channels) in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :TRIGger[:EDGE]:LEVel command sets the trigger level voltage for the

active trigger source.

Query Syntax

:TRIGger[:EDGE]:LEVel? [<source>]

The :TRIGger[:EDGE]:LEVel? query returns the trigger level of the current

trigger source.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 589

• ":TRIGger[:EDGE]:SOURce" on page 606

• ":EXTernal:RANGe" on page 274

• ":POD<n>:THReshold" on page 414

• ":DIGital<d>:THReshold" on page 249

NOTE

If the optional source is specified and is not the active source, the level on the active source

is not affected and the active source is not changed.