Technical data

:TRIGger Commands 29

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 597

:TRIGger:LEVel:LOW

(see page 790)

Command Syntax

:TRIGger:LEVel:LOW <level>, <source>

<level> ::= 0.75 x full-scale voltage from center screen in NR3 format

for internal triggers

<source> ::= CHANnel<n>

<n> ::= 1 to (# analog channels) in NR1 format

The :TRIGger:LEVel:LOW command sets the low trigger voltage level voltage

for the specified source.

Query Syntax

:TRIGger:LEVel:LOW? <source>

The :TRIGger:LEVel:LOW? query returns the low trigger voltage level for

the specified source.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 589

• ":TRIGger:LEVel:HIGH" on page 596

• ":TRIGger[:EDGE]:SOURce" on page 606