Technical data

516 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
25 :SBUS<n> Commands
:SBUS<n>:UART:COUNt:RESet
(see page 790)
Command Syntax
:SBUS<n>:UART:COUNt:RESet
Resets the UART frame counters.
Errors • "- 241, Hardware missing" on page 753
See Also • ":SBUS<n>:UART:COUNt:ERRor" on page 515
• ":SBUS<n>:UART:COUNt:RXFRames" on page 517
• ":SBUS<n>:UART:COUNt:TXFRames" on page 518
• "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:MODE" on page 451
• ":SBUS<n>:UART Commands" on page 509