Technical data

504 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

25 :SBUS<n> Commands

:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh

(see page 790)

Command Syntax

:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh <width>

<width> ::= integer from 4 to 64 in NR1 format

The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh command sets the width

of the SPI data pattern anywhere from 4 bits to 64 bits.

Query Syntax

:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh?

The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh? query returns the

current SPI data pattern width setting.

Return Format

<width> ::= integer from 4 to 64 in NR1 format

See Also • "Introduction to :TRIGger Commands" on page 589

• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 503

• ":SBUS<n>:SPI:SOURce:MISO" on page 501

NOTE

The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh should be set before

:SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA.