Technical data

:SBUS<n> Commands 25
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 481
:SBUS<n>:LIN:PARity
(see page 790)
Command Syntax
:SBUS<n>:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id
field in the LIN decode bus.
Query Syntax
:SBUS<n>:LIN:PARity?
The :SBUS<n>:LIN:PARity? query returns the current LIN parity bits
display setting of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors • "- 241, Hardware missing" on page 753
See Also • "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:LIN Commands" on page 479